KML files created by the SailTrax system are designed to be used with Google Earth Pro (GE). This does not prohibit these KML files from being used with any other tool designed to read a KML file. A key feature though of GE is the time slider, which provides the ability for a KML file that also contains time tags to be displayed/animated by using this slider. While not all KML files have time tags those created with SailTrax do.
If the computer does not already have GE then a copy of this freeware will need to be installed. Use your search engine of choice to find 'Google Earth Pro'. Go there, download and install it. Once GE is ready to run make sure you have a copy of your SailTrax KML file(s) on the same computer as GE.
This is how GE will appear when it is started:
[Image is shown in half size. Click to see it full size]
IF THIS IS THE FIRST TIME GE IS BEING USED (for Sailtrax files) then at the top click on 'Tools'. Select 'Options'. In the window which appears select the 'Navigation' tab. The option box should then look something like this:
[Image is shown in half size. Click to see it full size]
In the lower right 'Navigation' box press the button for 'Do not automatically tilt when zooming'. Press 'Apply', then press 'OK'. Sailtrax KML files are designed to be viewed from above, looking down on the water. If the view should for any reason get tilted then click once in the display window (to make it the active item) and then simply press the 'u' key on the keyboard. This will take the view up (hence the 'u') to a top down view.
The easiest way to get a KML data file displayed in GE is to drag and drop the KML file into the display window. With a sample file which was used for this example the result will look like this:
[Image is shown in half size. Click to see it full size]
The time slider can now be seen in the upper left portion of the display window; the time slider automatically appears when the KML data has been time tagged. On the right and left of the time slider bar are the the lead and trail sliders respectively. Click and hold on a slider to move it left or right. The lead (right) slider adjusts the point in the time along the slider at which the boat icons are placed along their path. The trail (left) slider adjusts how much of the trailing path will be highlighted. Here is the view when the two sliders are moved towards the center of their travel:
[Image is shown in half size. Click to see it full size]
Once the trailing slider is moved from its far left point on the bar, then to the degree there is space it will stay that distance behind the lead slider. In other words, the highlighted trail will stay that fixed distance. To make the trail longer or shorter then move the trailing slider as appropriate.
The size of the time slider display is set. If the data in the KML file spans a longer time then each pixel moved by the slider will be a bigger jump in time.
As far as is known at this time, there is no keyboard option/mechanism for moving the time slider. Manual movement of the time slider can only be done placing the cursor on a slider, then click and hold and move the slider left or right. Which means there is one other option for controlling the slider: adjust the speed / rate-of-movment for the cursor. This would be done in controls for the mouse, touchpad, trackball or whatever pointing device you are using. This option is further discussed in the section at the bottom of this page titled 'Terribly annoying trade-offs'.
An automatic animated view of the data can be initiated by clicking on the fourth from the left icon in the top of time slider box; the one that looks like a clock with a triangle at the 3 o'clock position. There is a limited ability to adjust the speed at which this automatic animated display runs. Click on the second from right icon in the time slider box, the wrench, and it should display this window:
[Image is shown in half size. Click to see it full size]
As can be seen there is a slider for 'Animation speed' in the lower portion of this window. If this Animation speed slider is already far left, as shown above, and a slower animation speed is desired, then that is not possible.
After having clicked in the display window to make it active then these keys will have the following action:
'PgUp' -- zooms in
'PgDn' -- zooms out
'left arrow' -- slides view left by moving display right
'right arrow' -- slides view right by moving display left
'up arrow' -- slides view up by moving display down
'down arrow' -- slides view down by moving display up
'shift'+'left arrow' -- rotates view counter clockwise
'shift'+'right arrow' -- rotates view clockwise
'shift'+'up arrow' -- rotates view position up to above; a top down view
'shift'+'down arrow' -- rotates view position down towards horizon
'n' -- rotates map to North being up on the screen
'u' -- rotates view up to a fully top down view
The above covers the basics, which will serve most purposes very well.
Below is an advanced feature for finding a boat's speed over ground and the distance it traveled.
Place the cursor on a boat icon or its trail, right click, then select 'Show Elevation Profile'. Two things will happen to the display.
First: In the left menu column the data file will automatically unfurl to show a click box for each track/boat. This unfurling could have been done manually in any of the above displays simply by clicking the right pointing black triangle to the left of the KML source file. With the KML file unfurled there is a check box next to each boat. To deselect a boat click on the check next to its name. The check will disappear and that data will be removed from the display. To re-select a deselected boat click again in the now empty box next to its name. A check will reappear and that boat's data will reappear in the display window.
Second: a new window will display along the bottom portion of the display. This new window shows two graphs in the same space: one is elevation (not valid with SailTrax files as a SailTrax KML file has no elevation data) and the other is speed over ground, which has been computed from the time tagged geolocation data. The time span across this new window matches the time span across the time slider: the start to finish time of the data in the source KML file. Move the cursor into this new display and a red arrow will appear at that point in time on the selected boat's track. Move the cursor back and forth across the graphs and the red arrow will correspondingly move along that boat's track. A static view of the display should look like this:
[Image is shown in quarter size. Click to see it full size]
At the location of the cursor in the graph box a number of instantaneous values are shown for that location. One of these values is speed over ground at that point.
There is one more feature to discuss: distance sailed. Move the cursor into the newly displayed window with the data graphs. Click and hold and drag left or right. The dragged-over section of the graph will be highlighted. At the same time the corresponding portion of the boat's path will be highlighted. The below image shows the selected boat being highlighted from the time it crossed the start line until the time it crossed the finish line:
[Image is shown in quarter size. Click to see it full size]
Now look at the top of the graph window in the above image. There are two lines of information. The left side of the second line says 'Range Totals'. The 'Range' here is the highlighted section. The next data field on this line is 'Distance'. The last data field is 'Time'. This is how the distance sailed in a race, and time to cover that distance, can be found for a boat in the race.
Yes, unfortunately, it is a manual process, and all the more so if you want to do it for each boat. Yes, it would be nice if there were a single button to hit which would spit out 'start to finsh time' and 'start to finish distance sailed' in one chart for all the boats in the race. While cumbersome, deselecting all boats and then selecting one boat at a time (which, true, is not what is shown in the above image) helps make it easier to see when the selected boat crossed the start/finish lines. To help make that easier, the view could be zoomed into the start/finish line, because the entire path sailed does not need to be seen on the screen for the 'Distance' and 'Time' values to be reported. If you did not win the race, then maybe one place to begin is simply by finding the start to finish time and distance for your boat and then doing the same for the boat that won.
'Terribly annoying trade-offs'
Above it is mentioned that an option for finer grain control using the time slider in GE is to adjust the speed / rate-of-movment for the cursor. This is accomplished via the settings/controls for the mouse, touchpad, trackball or whatever pointing device you are using. Here is what is going on with this option and why it can be both highly effective and so very annoying.
The fundamental nature of a computer pointing device is that as it is being moved it goes tick, tick, tick. The computer software counts up these ticks, and then those counts are translated into motion by the settings which drive the cursor's movement. Inside the computer there is a place to set how fast or slow these ticks move the cursor. For each computer and operating system combination there is a different way to access this control setting, which is why these details are not given here. But accessing this setting on your computer is information which can be found using your search engine of choice.
By greatly slowing down the cursor movement it becomes very easy to achieve fine grain control of the GE time slider, so that if desired the boats are moved slowly by the time slider. HOWEVER it also means _all_ cursor movements on the computer are greatly slowed down. If you are interactively jumping back and forth between using the cursor to control the time slider and doing anything else on the computer, then moving the cursor between GE and the other thing(s) you are doing is going to be a real pain because of how slow the cursor is set to move. Hence why this is a terribly annoying trade-off.
Yes, there are three options which may make this trade-off less annoying. One option is some pointing devices (ie; some trackballs) come with a speed switch: press or hold that switch and the cursor speed is changed. The second option, mentioned here for completeness but likely the most annoying, is if you are just using the cursor to move the time slider and not doing anything else on the computer during this time. With this option it may not be unreasonable to change the cursor settings to slow, spend the time looking at the KML file(s), then return the cursor to its prior speed and go back to doing other things.
The third option, which may be very reasonable if you are for example a coach who will be using these files regularly, is to spend ten dollars and buy an extra USB mouse. Most people are not aware a computer can handle multiple pointing devices simultaneously, be they a mouse, touchpad, trackball, or whatever. You can keep the existing settings on your primary pointing device, and make the settings on this new / auxiliary / secondary pointing device to be for very slow movement. This secondary pointer does not have to be plugged in all the time; hence the beauty of an inexpensive, extra USB mouse. Use the primary pointing device as you normally would, and the secondary one for fine grain movement. So, for example, the primary pointing device can be used to put the cursor on the time slider. Then, when wanted or needed, the secondary pointing device can be used for the fine grain time slider movement. Not a solution for everyone in every situation. But again, if you are a sailing coach or instructor or anyone who is frequently using these files, this many be an inexpensive practical option to consider.